Athletic Tracks

Novinky

Bratislava – ZŠ Ružová Dolina

Bratislava – ZŠ Ružová Dolina – PORPLASTIC EP

Read more

Bratislava ZŠ Tupolevova

Bratislava ZŠ Tupolevova – PORPLASTIC SB

Read more

Kysucké Nové Mesto

Kysucké Nové Mesto – atletický ovál 400 m – PORPLASTIC SB

Read more

Zpět

Athletic Tracks

Athletic Tracks surfaces

All the types offered fulfil national and international standards of DIN 18035 section 6/7, they hold the certificates IAAF, they have been verified by independent institutes, sport unions and organisations and they are under permanent internal and external quality control. Proper development of products, manufacture and installation by one supplier – these are the best guarantee features of modern, economic, resistant and environment friendly systems of sport surfaces. The systems of PU-rubber granulate proved well for more than forty years as sport surfaces in massive extent – school sports grounds, running tracks, bally play fields, etc. – as well as an optimal base for performance and top-level sport. They are suitable for new constructions as well as for re-vitalisation or re-topping of older sport fields.

Porplastic SW

Porplastic SW Certified for DIN 18035/6:Typ D, certificate IAAF. Elastic layer of PUR/recycled granulate, and pore-closing layer and poured layer topped with colour granulate EPDM, water impermeable . Running tracks in competition and top-performance sport, high quality sport surfaces, thick. 13 - 17 mm Composition Elastic layer, applied directly on site using a special finisher, with thickness of 10 - 13 mm. It consists of polyurethane bonding compound and granulate of recycled rubber, fraction 1 - 4 mm and PU cement layer. A layer of PU bonding agent with EPDM granulate, fraction 1 - 4 mm. Requirements Level values according to standard +- 4 mm per 4 m. Asphalt carpet, concrete. Gradient setting 1 % - 2% from one side of the track (area) to the other. Application The asphalt base is penetrated. Then, there is prepared a mixture of recycled granulate with fraction 1 - 4 mm and polyurethane bonding agent. The mixture is applied in front of the finisher that performs...
Více informací

Porplastic SB

Porplastic SB Certified for DIN 18035/6: Type A, certificate IAAF. Structured sprayed layer, water permeable. Running tracks, play grounds, ideal even for re-vitalisation and re-topping, thick. 13 mm. Composition Elastic layer, applied directly on site using a special finisher, with thickness of 10 mm. It consists of polyurethane bonding compound and granulate of recycled rubber, fraction 1 - 4 mm. Upper spray-on : mix of PU bonding compound EPDM granulate, fraction 0,5 - 1,5 mm. (3 mm) Requirements Load-carrying layer: Level values according to standard +- 2 mm to 2 m. Drainage asphalt carpet. Gradient setting 0,5 % - 1 % from one side of the playground to the other side. Surface water de-watering to a spout or a channel with grid. Application The asphalt base is penetrated. Then, there is prepared a mixture of recycled granulate with fraction 1 - 4 mm and polyurethane bonding agent. The mixture is applied in front of the finisher that performs installation of the base...
Více informací

Porplastic M olympic

Porplastic M olympic Certified for DIN 18035/6:Typ E, certificate IAAF. Massive one-layer or two-layer poured surface connected by PUR topped with colour granulate EPDM, water impermeable. Running tracks for international competitions and top-level sport, thick. 13 – 18 mm Composition Elastic layer, applied directly on site using a special finisher, with thickness of 2 x approx. 5 mm. It consists of polyurethane colour bonding agent and granulate of recycled rubber, fraction 1 - 4 mm and PU cement layer. A layer of PU bonding agent with EPDM granulate, fraction 1 - 4 mm. Requirements Level values according to standard +- 4 per 4 m. Asphalt carpet, concrete. Gradient setting 1% - 2% from one side of the track (area) to the other one. Application The asphalt base is penetrated. Then, there is prepared a mixture of recycled granulate with fraction 1 - 4 mm and polyurethane bonding agent. The mixture is applied in front of the finisher that performs installation of the base...
Více informací

Porplastic EP

Porplastic EP Certified for DIN 18035/6: Type C, attested according to IAAF Single-layer PUR/EPDM surface, water permeable. High quality elastic surface, designed for multi-purpose outdoor sport fields, ideal for tennis courts and school athletic tracks, thick. 10 mm Composition Elastic layer, applied directly on site using a special finisher, with thickness of 10 mm. It consists of polyurethane bonding agent and EPDM full-colour granulate (rubber resistant to all and any weather influences). Requirements Level values according to standard +- 2 mm per 2 m. Ideally drainage asphalt carpet. Alternatively asphalt ABJ impermeable or concrete. (Mainly in case of smaller areas. Gradient setting 0,5 - 1 % from one side of the playground to the other side. Surface water de-watering to a spout or a channel with grid. Application The asphalt or concrete base is penetrated. Then, there is prepared a mixture of EPDM granulate with fraction 1 - 3 mm and polyurethane bonding...
Více informací